3 amp install questions

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49775
Printed Date: May 12, 2025 at 11:28 AM

Topic: 3 amp install questions

Posted By: 90K5
Subject: 3 amp install questions
Date Posted: February 10, 2005 at 3:56 AM

When running dual amps can I run the remote turn on wire in series to both amps?

My components have crossovers for them should I leave that amp at full pass or also use it's crossover?

Any easy spots to pull a 4 gauge through the firewall on the driver's side of a 02 Silverado?

Replies:

Posted By: stevdart
Date Posted: February 10, 2005 at 5:11 AM

1. Usually no problems to just 2 amps. Run another wire from amp to amp. 2. Use the amp's high pass filter to remove sub freqs before sending to the components. 3. ?? I haven't looked at this truck.

Posted By: specialauto
Date Posted: February 10, 2005 at 10:09 AM

if u wanted to u could run all the wries from.. it would be better to run them deifferent tho, but u can easliy put the wires together.

-------------
Canadian Auto Sound
Starting Installer

Print Page | Close Window