LPF

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49892
Printed Date: April 28, 2024 at 10:37 AM

Topic: LPF

Posted By: Sancho
Subject: LPF
Date Posted: February 11, 2005 at 1:34 PM

Ok i put LPF in my HU on 80Hz and on my sub amp i got Low Pass Filter also from 35Hz to 250Hz

How should I put in my amp all the way down to 35Hz or in the middle somwhere or up to the end to 250Hz ????

-------------
Head Unit:Alpine CDA 9835
6.5 MB Quart Pce 210
Amp:JBL 80.4
Amp:JBL 1200.1
Sub:Adire Brahma 12 MKII

Replies:

Posted By: DYohn
Date Posted: February 11, 2005 at 1:48 PM

Don't use both. If you use the LPF on your head, leave the amp set to flat. Or set it above 80Hz (yes, turn it up to 250Hz) so it does not interfere with the HU. Or turn the HU filter off and set the amp around 80Hz.

-------------
Support the12volt.com

Print Page | Close Window