Print Page | Close Window

Remove ’95 Accord Head Unit

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49912
Printed Date: May 24, 2025 at 4:11 PM


Topic: Remove ’95 Accord Head Unit

Posted By: tiger72
Subject: Remove ’95 Accord Head Unit
Date Posted: February 11, 2005 at 6:35 PM

Any tips on removing the stock head unit on a '95 accord so I can install a new reciever?



Replies:

Posted By: slammedb5
Date Posted: February 12, 2005 at 2:10 AM
Open the center console and pry off the plastic cover that you see, then remove the 2 screws that you see. Open the cup holder and pull out the cup holder insert, then remove the 3 screws that you just exposed. Now, pull the console back away from the dash towards the rear of the car. At the base of the gear shift trim, you will see 2 screws. Remove them. Now pull out the ashtray and remove the single screw you see where the ashtray used to be (straight back). Now, starting at the gear shift portion of the radio trim, pull up, and then out ( a hook tool wil help here) until you have it completely free. Underneath the factory radio, you will see 2 8mm bolts/screws. Loosen these (or remove them) and pull the radio out of the car. Good?

-------------
EK Civic
security
no audio





Posted By: tiger72
Date Posted: February 12, 2005 at 2:57 AM
worked perfectly. Thanks!



Posted By: tiger72
Date Posted: February 13, 2005 at 9:57 PM
ok, i've got everything installed fine, but which wire is the constant 12v wire? on here I have different colors than those displayed. When I turn the car on now the reciever works just fine, but when i turn it off the reciever turns off loses all of its settings.




Print Page | Close Window