Box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50214
Printed Date: July 05, 2025 at 8:21 AM

Topic: Box

Posted By: Eat_mor_chikin
Subject: Box
Date Posted: February 16, 2005 at 7:12 AM

How do I find out the measurements of the box? And which box to get? Or you can just show me a website to buy it!

With two of these subs. https://www.cardomain.com./item/POWMOFO12

Replies:

Posted By: Bmnicolosi
Date Posted: February 16, 2005 at 10:17 AM

just build a box with the volume that is recommened on that website---it's hard to find prefabbed boxes with that much airspace.

-------------
If you say "I already know how", don't ask me a single question.

Posted By: DYohn
Date Posted: February 16, 2005 at 10:53 AM

I can't recomend those subs, but if using them is your plan then I do recomend you either build or have built a proper enclosure for them. Any reputable car stereo shop in your area can handle building an enclosure for you. Finding a pre-fab that will suit them is a difficult proposition if not impossible.

Realize the MFG recomendation of a 2.4 cuft ported enclosure tuned to 40Hz is for ONE of these. Putting two into the same enclosure will be different and not simply twice this size.

Here are the manufacturers specs for designing your enclosure: Fs: 36.7 Hz; Vas: 20.67 l. ; Qts: 0.3363 ; Xmax: 0.7"

-------------
Support the12volt.com