premier dehp8mp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50502
Printed Date: May 19, 2025 at 6:20 AM
Topic: premier dehp8mp
Posted By: ken_steele
Subject: premier dehp8mp
Date Posted: February 20, 2005 at 5:05 PM
Got this one yesterday dont need to have an amp anymore to run the door speakers. ANY 1 else got this here? https://www.pioneer-america.com/pna/product/detail/0,,2076_4041_76829766,00.html
Replies:
Posted By: The2dCour
Date Posted: February 20, 2005 at 7:34 PM
I duno what u have 4 door speaks but i still run amp 4 my speaks. the hu is attractive and u can put ur own movies on it. make sure u have good ground 2 hu or it will sound bad. The 60w output is actually not as much because thats max not rms. I wanna make my interior leds blue now coz of this unit, and u will too once you install it. BAD NEWS>
-------------
Dual Nakamichi 6.5 component fronts, Alpine 6x9 Rears, Alpine 12" DVC sub, Pioneer P8MP deck, JBL 600.1 amp running the sub, Alpine 65wx4ch amp for the fronts, Tsunami 1.2f Cap wired to the JBL.
Posted By: oonikfraleyoo
Date Posted: February 20, 2005 at 7:42 PM
Wow thats a really cool looking HU. ------------- Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
Posted By: ken_steele
Date Posted: February 21, 2005 at 5:43 PM
I have kenwood 3 ways which get enough power for me at least cleanly from the head unit I think the output is around 27 rms which is sufficient for my suv. Still suffering from dimness syndrome. I was wondering if a dclass amp would be better than my fosgate power 500? Yeah I have anasty green and red for my interior. Quick question when I upload any ney backgrounds and pics would the old ones be deleted? Time to customize
Posted By: forbidden
Date Posted: February 21, 2005 at 5:51 PM
The answer for the amp is simple here, what is the sub (s) you will be running. Nothing wrong with a Power 500 as long as it is doing it's job properly. I am not familiart with the head so I'll leave the finer points of it up to someone who has one. I have just become a Pioneer dealer in the last week and will see what the line can do for me.
-------------
Top Secret, I can tell you but then my wife will kill me.
Posted By: audioadam86
Date Posted: February 21, 2005 at 5:53 PM
I am waitin for my Pionner-dehp80mp to get here. They are identical besides the warranty and the pre-amp voltage right.? Cuz I was wonderin the same thing about the old backgrounds and stuff if it will be deleted?
Posted By: ken_steele
Date Posted: February 21, 2005 at 6:51 PM
The pre outs are 6.5 volt and yep warranty stuff as well. The fosgate is doing me fine I dont want to kill it by using 2 ohm dvc subs. I have the pioneer 306dvc subs in a sealed 1.0 cubic foot enclosure gains on the amp set at less than quater turn and it sounds good but the amp isnt 1 ohm stable and dont want to ruin it so Im looking for a class d at least amp to run my subs I had them wired in 8 ohm to have a 4 ohm bridged load on the amp but it seemed that something was missing from the setup. Any help would be greatly appreciated Ohh my setup fosgate power 500 topic head unit, knuconcept 4 ga wiring kit, knu distro ground and power blocks Belden custom made rcas Big 3 upgrade 1 farad strike cap and cooling fan for amp Kenwood 3 ways in all doorsforgot the model 04 ones though.
|