I will be installing a Clarion or a JVC unit in an 1964 dodge dart and need a little information. I assume I can leave the ANT wire alone since there is obviously no power antena but what about the ILL wire? Can I leave it alone or does it have to be hooked up, and what differance does it make? I will be installing in the glove box to leave the original AM radio in place, will a ground strap from the unit to the frame be adequate?
Also, the Clarion unit has a wire labled PH_INT, what is it for?
Thanks for any help.
cosmic moma
-------------
cosmic moma
I believe that the wire labled PH_INT is for the power antenna, which is a signal wire and is also used in other applications. When I connected my head unit, I did not connect the ILL wire and it was fine. Best of luck to you on installing it.
-------------
Current Student at Lake Michigan College.
Studying Electronics Technology.
After Graduation I Plan to go to Mobile Dynamics to recieve a MECP (Mobile Electronics Certified Professional) Certificate.
PH_INT is probably the Phone Interuppt wire ( read - phone mute to those in the know ) ILL powers up your panel lamps, hook it to a dedicated ILL lead in the vehicle or you can loop it with the power ant lead to turn them on when you power the unit up.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
In that car you don't need the ILL. wire connected. I actually did a 1964 dart convertible about two and a half months ago. We put an eclipse head unit in the glove box. I made the new panel screw in using the same screw holes as that the glove box liner used.
Thank you all for the input, hopefully I don't pop any fuse's when I do the unstall.
-------------
cosmic moma