speaker design

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50654
Printed Date: April 28, 2024 at 6:07 PM

Topic: speaker design

Posted By: 00silverga
Subject: speaker design
Date Posted: February 22, 2005 at 9:04 PM

For a class I'm taking we have to design a working speaker, and we are allowed to use only the basket and magnet from an existing speaker. Everything else, diaphram, spider, surround, ect must me made. My question is what materials would you guys suggest for making these parts. Any help and suggestions are greatly appreciated.

Also, we are probably making a 10" and a much smaller speaker--something like a 5" because it will get hooked up to a small 12 watt stereo (boombox). Although, we can probably hook the ten up to my car amp if needed.

Thanks for any help again.

Replies:

Posted By: customsuburb
Date Posted: February 22, 2005 at 10:33 PM

Here's alot of different speaker materials but I don't know where you would find most of them. https://www.crutchfieldadvisor.com/S-lVs4FTVwXbI/learningcenter/car/speakersmaterials.html Paper is probobly the cheapest material for the cone.

Google it and just search around. I'm sure someone has done it before. www.diyaudio.com has alot of helpful people also.

Posted By: xaudiopipex
Date Posted: February 24, 2005 at 10:18 PM

where is that class your taking?