Print Page | Close Window

Tweeters

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50792
Printed Date: May 08, 2024 at 11:41 PM


Topic: Tweeters

Posted By: Sancho
Subject: Tweeters
Date Posted: February 24, 2005 at 7:07 PM

Hi, need to buy pair of good sq tweeters need your help, which one to get?

Thank you



-------------
Head Unit:Alpine CDA 9835
6.5 MB Quart Pce 210
Amp:JBL 80.4
Amp:JBL 1200.1
Sub:Adire Brahma 12 MKII



Replies:

Posted By: fastev
Date Posted: February 24, 2005 at 7:22 PM
You might look at Focal's Audiom TLR or TN51's.




Posted By: Poormanq45
Date Posted: February 24, 2005 at 8:20 PM
That's a very broad question.

How much power are you going to beable to supply to the tweeters?

Do you like your high freencies to "stand out" above the mid and/or low frequencies?

-------------




Posted By: Francious70
Date Posted: February 24, 2005 at 11:04 PM
Crisp high end, use titanium or aluminum tweets.

Warm smooth high end, use silk tweets.

Just to be the absolute shiznit, use ribbon tweeters.

Paul




Posted By: haemphyst
Date Posted: February 25, 2005 at 12:26 AM
Crisp high end... Is that Latin for "knife stabbing me behind the eyes"? LOL

Metal dome tweeters suck, IMHO. I've never heard one I did like - not even the Focal Ti stuff, which everybody else seemed to like, for some reason unknown to me...

Yes, a true ribbon is the way to go for primo highs... I have the old school Infinity eMIT ribbons in my doors, and I love them still... Paid 25 bucks for the pair for a demo box set that never got hooked up - just looked at in a showcase! BE CAREFUL, though, they don't like to be overpowered at all! Very little difference between continuous and peak power in a ribbon.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."




Posted By: kfr01
Date Posted: February 25, 2005 at 12:44 AM
Sancho:  are you going to use an electronic crossover from the midrange to tweeter, or?

-------------
New Project: 2003 Pathfinder





Print Page | Close Window