Print Page | Close Window

wind noise

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5118
Printed Date: May 10, 2025 at 6:44 AM


Topic: wind noise

Posted By: bombalabom
Subject: wind noise
Date Posted: November 04, 2002 at 8:47 AM

hie,i'm a newbies here......

i'm using a kenwood KEC202 2-Way or 3-Way Electronic Crossover only to audiovox amp. the 2X 8' sub. my front are using phase inner 5 1/2 inches and kenwood 1 1/2 tweeter. my rear only have that 2 8' sub... i found that no matter what cable i use,it still got the wind noise when i increase engine RPM..... anyone can help me??? maybe the rem wire i connect wrongly.... i connect the amp rem and kec202 rem together from the pioneer 2450 cd player ..... power supply to kec202 together with the cd player ground to kec 202 together with the cd player before i install my 12' earthquake sub.. i hope to settle down this problem....helps.... information appreciated... thanks



-------------
dAnIeL-cF



Replies:

Posted By: Velocity Motors
Date Posted: November 04, 2002 at 9:28 AM
  • Make sure that none of you RCA wires are running beside your power wires
  • check your ground wires and make sure the paint is all scrapped off that area that the ground wire is attached to
  • make sure that the gains on the amp are not maxed out. This will give you whining noises
  • make sure your ground is less than 3 feet long


    • -------------
    Jeff
    Velocity Custom Home Theater
    Mobile Audio/Video Specialist
    Morden, Manitoba CANADA


    Print Page | Close Window