2000 explorer vs dd headunit
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51430
Printed Date: May 22, 2024 at 8:22 PM
Topic: 2000 explorer vs dd headunit
Posted By: accord78
Subject: 2000 explorer vs dd headunit
Date Posted: March 06, 2005 at 9:11 PM
would a double din in dash monitor like the kenwood or rosen dvd player fit in this opening perfectly???? please help
Replies:
Posted By: ss-installer
Date Posted: March 06, 2005 at 9:17 PM
we put a kenwood dd monitor in one and it fit almost perfect but the guy didnt have the trim ring. it would look real good with the ring.
-------------
Posted By: accord78
Date Posted: March 06, 2005 at 9:20 PM
what do u mean almost perfect??? is there any modification u have to do to the opening??? and how does it looks lol
Posted By: ss-installer
Date Posted: March 06, 2005 at 9:31 PM
there were no mods done to the opening but some mods to the bracket but fairly simple. i say "almost" because the missing trim ring exposed gaps between the monitor and dash. with the trim ring it should be clean, if not , then buy a dash kit and dremmel the hole for the monitor and clip the dash kit in. should make it 100% pro look.
-------------
Posted By: Chad7n7
Date Posted: March 07, 2005 at 12:09 AM
I have installed the Kenwood Double Din Unit in a 1999 Ranger, which ic the same as your explorer, there were no mods made, besides having to be creative to mount it, because of the lack of using a kit, but it came out very clean, thus this was a new unit and the trim ring was used.
-------------
Posted By: oonikfraleyoo
Date Posted: March 07, 2005 at 12:51 AM
Yup, I put one in an Explorer too and it turned out perfect. Did have to get creative with the mounting but it was relativly simple. ------------- Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
|