Ford factory amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51553
Printed Date: May 02, 2025 at 8:37 PM

Topic: Ford factory amps

Posted By: chisam14
Subject: Ford factory amps
Date Posted: March 08, 2005 at 4:00 PM

Does anyone know if the amp turn on in a 2000 Mustang with a Mach system has a 5 volt or 12 volt turn on. I was told that it had a 5 volt, and by putting a resistor in the aftermarket hu turn on wire I could stop the popping noise when the amp powers up.

Replies:

Posted By: kgerry
Date Posted: March 08, 2005 at 4:46 PM

i would use a 7805 regulator not a resistor if you're going to try that.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window