2 amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51595
Printed Date: May 05, 2025 at 9:03 PM

Topic: 2 amps

Posted By: Grat_master
Subject: 2 amps
Date Posted: March 09, 2005 at 2:42 AM

Hey,

For now, I have 2 12" cerwn-vega (400 watts rms each) with a Rockford Fosgate type RF x5 (800 watts rms) ... I also have 2 6.5" spl speakers in front and the same thing in rear ... I want to add an amplifier to those speakers ... Is this going to use too much power ? What do I need ?

Anyway, if you can help me with all this it will be great ! If it's a repost, than just ignore this topic, and I'll search for some other ones ...

thx

Replies:

Posted By: ss-installer
Date Posted: March 09, 2005 at 7:14 AM

try matching the 6.5s with the spl high level 300 or 400. they are strictly for mids, there is no lowpass.

-------------

Posted By: Grat_master
Date Posted: March 16, 2005 at 6:13 PM

another little question ...

how do I connect my rca, if my hu only got 2 rca output ? one for the front speakers, one for the rear speakers OR subwoofer, when I activate my subwoofer control ... do I need an external crossover ?

thx

Posted By: Chad7n7
Date Posted: March 16, 2005 at 6:17 PM

If you are using a single two channel amplifier to power fronts and rears, then all you need is one set of preouts. If you use a four channel,you can use a set of splitters to split the jacks from one set to two sets, any local shop should carry them.

If the amplifier you choose to use has a built in crossover, then there is no need for an external.

-------------

Print Page | Close Window