New Brahma Dimensions
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51836
Printed Date: June 08, 2024 at 4:04 AM
Topic: New Brahma Dimensions
Posted By: oonikfraleyoo
Subject: New Brahma Dimensions
Date Posted: March 13, 2005 at 12:22 AM
This is really for Steven but his inbox is full. I think someone may have already asked this but I can't find it.
If I make my box to the dimensions of the old brahma, will the new one still fit? It will be F/G and my main concern is the rings. If I make the I/D of my mounting ring 11.125" and the I/D of my flush ring 12.5", will that be good?
Also I know you can't give away the exact date, but HOW MUCH LONGER???
Thanks
-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
If I make my box to the dimensions of the old brahma, will the new one still fit? It will be F/G and my main concern is the rings. If I make the I/D of my mounting ring 11.125" and the I/D of my flush ring 12.5", will that be good?
Also I know you can't give away the exact date, but HOW MUCH LONGER???
Thanks
-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
Replies:
Posted By: Steven Kephart
Date Posted: March 13, 2005 at 2:45 AM
As far as I know the enclosure sizes will remain the same. However I am not sure about the cut out. Send me an e-mail at skephart@adireaudio.com and I will check on it for you. I prefer e-mails anyway which is why my in box if full. 
Steven Kephart
Adire Audio
-------------
Posted By: Alpine Guy
Date Posted: March 13, 2005 at 8:57 AM