Running Patch Cables In A 2000 F150

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51897
Printed Date: May 15, 2024 at 12:12 PM

Topic: Running Patch Cables In A 2000 F150

Posted By: mrmsudawgs
Subject: Running Patch Cables In A 2000 F150
Date Posted: March 14, 2005 at 11:43 AM

Does anyone know how to feed patch cables from the back of my head unit towards the passenger side of the cab. I pulled the head unit out and saw no clear cut path. Do I have to take the entire dash board out to feed the wires through?

Mike

Replies:

Posted By: Chad7n7
Date Posted: March 14, 2005 at 3:10 PM

Try using a "fish tape", or straighten a coat hanger, feed it through carefully, and tape the wires tho it once its through.When pulling back up, take your time and be careful, you don't want to catch on anything and damage the RCA's.

-------------

Posted By: mrmsudawgs
Date Posted: March 14, 2005 at 5:06 PM

I'll give it a try. Thanks!

Mike

Posted By: big_man_tim
Date Posted: March 14, 2005 at 8:05 PM

Hey I have a 2001 F150 and what i did was take the panel off that is on the floor over the hump and ran them down to there from the headunit and then under the dash to the side and back... i hope this is a help to you

Tim

Posted By: mrmsudawgs
Date Posted: March 15, 2005 at 1:35 PM

Thanks big man. I'll take a look at it tonight when I get home. Maybe I can make that work.

Mike

Print Page | Close Window