Print Page | Close Window

SPL and SQ sub box in one

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52078
Printed Date: April 29, 2024 at 11:03 PM


Topic: SPL and SQ sub box in one

Posted By: customsound79
Subject: SPL and SQ sub box in one
Date Posted: March 17, 2005 at 9:08 PM

I noticed that I can't find good enough higher frequency bass and lower frequency bass out of one parallel designed box for two subs. I want to build a box different kind of box: half is ported and sized to SPL specs and the other half sealed and sized for SQ specs. Each is powered by a seperate amp. Has anyone tried this and what was your result or what is your projected result? The equipment is listed in my signature.

P.S. I know half and half is not completely accurate for you smart asses out there 



-------------
My wife will never understand why, lucky for her!



Replies:

Posted By: customsound79
Date Posted: March 17, 2005 at 9:12 PM
By high frequency I mean around 125hz and lower being between 60hz and 25hz. I can kill at 80 right now, but that...well...you know the word.

-------------
My wife will never understand why, lucky for her!


Print Page | Close Window