Externally Bridging 2 amplifiers

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52428
Printed Date: May 16, 2025 at 8:44 AM

Topic: Externally Bridging 2 amplifiers

Posted By: spl/luxy
Subject: Externally Bridging 2 amplifiers
Date Posted: March 23, 2005 at 3:21 AM

Ok to all the Electronics whizz'z out there, i am wondering if there is a way to externally bridge 2 amplifiers that were not designed for it?

If so what would the limitations be etc...

Obviously this is for a mono signal only......

Any help , suggestions etc would be greatly appreciated.......

-------------
Australia's Loudest Street Max 3-4 Car Ever!

Replies:

Posted By: spl/luxy
Date Posted: March 23, 2005 at 3:22 AM

Something wrong with that post!!!! Damn it....

-------------
Australia's Loudest Street Max 3-4 Car Ever!

Posted By: DYohn
Date Posted: March 23, 2005 at 8:28 AM

Do not cut text from another program and paste it into the message box. You must type it directly here.

To answer your question, yes it is possible with SOME amps if you have the proper knowledge, test equipment, and amplifier schematics. I do not recomend it unless you really, really know what you are doing.

-------------
Support the12volt.com

Posted By: spl/luxy
Date Posted: March 23, 2005 at 2:46 PM

DYohn] wrote:

Do not cut text from another program and paste it into the message box. You must type it directly here.
To answer your question, yes it is possible with SOME amps if you have the proper knowledge, test equipment, and amplifier schematics. I do not recomend it unless you really, really know what you are doing.

I did not cut and paste anything...... It happened twice.....
Anywayback on topic, getting access to the correct equipment,schematics etc is not an issue as i work in the industry, so that being said what should i be looking for???

-------------
Australia's Loudest Street Max 3-4 Car Ever!