Print Page | Close Window

Trailblazer 6.5 Speakers In Rear

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52503
Printed Date: July 15, 2025 at 12:41 PM


Topic: Trailblazer 6.5 Speakers In Rear

Posted By: amb4life
Subject: Trailblazer 6.5 Speakers In Rear
Date Posted: March 24, 2005 at 10:24 AM

I purchased the Alpine SWR-17LS components for my 2002 Trailblazer adn found that the fitment was a little off. The front doors i had no problem mounting however in the rear door the magnet for the midbass obsructed the rolling down of the window. Is there a spacer or something that would bring that midbass out maybe 1" or so? or maybe another idea that i havent though of ?



Replies:

Posted By: Francious70
Date Posted: March 24, 2005 at 11:28 AM
You could always leave out the rear fill. You could also cut your own baffels out of 3/4 MDF.

Paul



Posted By: customsuburb
Date Posted: March 24, 2005 at 11:36 AM

You could make some MDF rings. Are you sure you need to bring them out 1 inch though?



-------------



Posted By: amb4life
Date Posted: March 24, 2005 at 12:19 PM

acuallty about 1/4 inch would work. thanks for the input people


Print Page | Close Window