Bypassing factory bose amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52811
Printed Date: May 15, 2024 at 12:40 PM

Topic: Bypassing factory bose amp

Posted By: DaGrnd1
Subject: Bypassing factory bose amp
Date Posted: March 29, 2005 at 3:34 PM

I want to install an aftermarket alpine deck into my 2001 Nissan Pathfinder, but it has the premium Bose system with a factory amp. I want to bypass the amp if possible, or find the right wire for the remote turn on for the factory amp. I prefer to not cut any wires, but i can splice them into the harnesses if need be. My last resort is running new wire to all speakers. Is there an adapter that makes this plug-and-play? There are no diagrams on this site that I can find.

Thanks

Replies:

Posted By: kgerry
Date Posted: March 29, 2005 at 4:24 PM

you can get an adapter from Metra that will allow you to P&P... but your HU MUST have front & rear preouts for this adapter to work....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window