Finishing Door panels, Suggestions?
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52941
Printed Date: August 23, 2025 at 1:28 AM
Topic: Finishing Door panels, Suggestions?
Posted By: racer427
Subject: Finishing Door panels, Suggestions?
Date Posted: March 31, 2005 at 5:37 PM
Hey guy's,
Yes but, another post. Like Ya need to hear from me Again! HA HA! Anyway, on to the topic.
I am in the process of building the Pods for my doors and I am in need of suggestions on how I should Finish them ? I am not very good with Fabrics or trying to get carpets to hug the curves nicely. On the other hand, I don't have alot of time to do the bondo thing and I really don't want to paint them. Any suggestions would be Appreciated.
Chris
-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
Replies:
Posted By: customsuburb
Date Posted: March 31, 2005 at 7:36 PM