Ai-net pinout?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53075
Printed Date: May 25, 2025 at 3:21 PM

Topic: Ai-net pinout?

Posted By: oonikfraleyoo
Subject: Ai-net pinout?
Date Posted: April 02, 2005 at 4:45 PM

I don't wanna spend $20 on an adapter if I don't have to. Any of you know which pin is what?

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Replies:

Posted By: tcss
Date Posted: April 02, 2005 at 4:51 PM

Come on Nik, don't go cheap on me now. cutting into the AI net cable might compromise the shielding. Spend the $20.

Posted By: Ween
Date Posted: April 02, 2005 at 5:00 PM

cut the cable. the grey shielded with green center conductor is one input (left?), the blue center the other (right). just make sure to insulate the remaining wire ends from each other.

mark

Posted By: tcss
Date Posted: April 02, 2005 at 5:07 PM

Nik, I respect Ween's opinion as much as anyone on this forum. Go for it....

Posted By: oonikfraleyoo
Date Posted: April 02, 2005 at 6:52 PM

Well, in the past two weeks I have dump well over $1000 into my new project (Jeeputer). I think I'm gonna cheap out on this part as I might not even keep the HU much longer. Thanks guys.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Print Page | Close Window