1995 ford explorer amp bypass

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53142
Printed Date: May 11, 2024 at 2:51 PM

Topic: 1995 ford explorer amp bypass

Posted By: raze
Subject: 1995 ford explorer amp bypass
Date Posted: April 03, 2005 at 4:46 PM

I'm trying to bypass the factory amp in my 1995 ford explorer, but no company makes a bypass harness for my car. Does anyone know which wires i need to connect to just bypass this? There's two connectors two the amp, the smaller squarer one, the one that is closer to the back door, has 8 wires--lightblue, lightblue/black, WHITE/ orange, WHITE/ red, green, yellow, gray, PURPLE / white--and wider 2nd connector that is the one closest to the front of the vehicle with 11 wires, 6 are smaller guage than the other 5--smaller 6: gray/pink, ORANGE / red, GREEN/ tan, WHITE/ green, gray/blue, tan / YELLOW; larger 5: blue, lightblue/white, ORANGE / green, darkgray/green, GREEN/ purple

Replies:

Posted By: tcss
Date Posted: April 03, 2005 at 5:20 PM

You should find the factory speaker wire harness under the pass. side rocker panel. The 8 wires will be bundled together. The colors will be ORANGE / green lf+, Light blue/white lf-, WHITE/ green rf+, Dk green rf-, Grey/blue lr+, tan / YELLOW lr-, ORANGE / red rr+, Brown rr-. Check speakers with 9 volt battery.

Posted By: raze
Date Posted: April 03, 2005 at 6:33 PM

edit: only the GREEN/ purple and teh BLACK/ green are the only big ones, the rest are small

Posted By: the12volt
Date Posted: April 03, 2005 at 6:45 PM

Metra makes an amplifier bypass for the 95 Ford Explorer, part number 70-5601 https://www.metraonline.com/product.aspx?sku=70-5601

https://www.the12volt.com/wireinfo/metraKits4.asp?info=alarm&year=1995-1997&make=Ford&model=Explorer&ID=2822&type=Kits

-------------
posted_image

the12volt • Support the12volt.com

Posted By: evanc
Date Posted: April 03, 2005 at 7:15 PM

Circuit City (at least 3 years ago) has the parts for that. I actually had them do the same thing to my 95 Explorer.

Check with them...

Posted By: the Installater
Date Posted: April 04, 2005 at 1:59 AM

The part that you need to bypass the amp can be found at circuit city. It comes as a big bundle of wires that you can plug into the harness at the factory amp. Then you would run the wires up to the radio.