Print Page | Close Window

impedance confusion

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5321
Printed Date: July 21, 2025 at 11:54 AM


Topic: impedance confusion

Posted By: jeffchilcott
Subject: impedance confusion
Date Posted: November 10, 2002 at 10:46 PM

now dont get me wrong I do know what I am doing....but I have been wondering something for awhile now and wondering if anyone knows the exact answer.....When you wire a 4 ohm DVC you get 2 or 8 ohm....   but why when you wire 2 dvc subs you get 1 or 4 in series and 2 or 8 in parallel,   why is it that the subs value would not be added like a single DVC       does this have to do with the fact  the DVC"S are connected inside each sub?   but the coils are not directly connected from sub to sub.....    Its kina puzzling if you really sit and think about it



-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place



Replies:

Posted By: JellyNutz
Date Posted: November 10, 2002 at 11:52 PM
Jeff look at what i wrote on your other post... Piece of cake..


Print Page | Close Window