wiring 6x9 & amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53224
Printed Date: May 02, 2024 at 8:12 AM
Topic: wiring 6x9 & amp
Posted By: young rikanz
Subject: wiring 6x9 & amp
Date Posted: April 04, 2005 at 1:59 PM
in my 98 camry, I took out the factory 6x9 and instaled two aftermarket ones that are rated up to 280watts each, I decied that i wanna run an amp to them so i can get louder sound out of them, I wired the amp and it works fine, but the problem is i dont know if i need the RCA plugs or not cause im not getting any sound out of the speakers when i hook them up to the amp, so do I need to run the RCA plugs out of the back of the headunit and if i do what plugs I use the rear or front??
Replies:
Posted By: geepherder
Date Posted: April 04, 2005 at 9:12 PM
Yes, you have to send the amp a signal before it amplifies anything. How is the amp working fine if you get no sound? If you're powering the rears, use the rear RCA outputs.
------------- My ex once told me I have a perfect face for radio.
Posted By: overworked2
Date Posted: April 04, 2005 at 9:38 PM
geepherder, I admire your patience!
------------- Check all advice given with a meter
Posted By: young rikanz
Date Posted: April 05, 2005 at 7:30 PM
ok thankz geepherder, what i ment by the amp is working fine is, its turning on but no sound, oh yea and i think i had the RCA plugs going into the front plugs for some reason lol, thankz again tho.
|