Print Page | Close Window

Crossfire VR602

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53255
Printed Date: June 15, 2024 at 2:41 AM


Topic: Crossfire VR602

Posted By: Alpine Guy
Subject: Crossfire VR602
Date Posted: April 04, 2005 at 8:46 PM

Sold my VR804 to a customer since i really don't need it for my application, i only need 2 channels.

Im looking at the VR602, im a little concerned about how its going to sound on my Type-X components.  I was looking at the specs compared to the VR804 and there pretty different, heres the spec (differences)on both amps:

VR804, Signal to noise (95db), Damping factor(150), Separation (61db)

VR602, Signal to noise (100db), Damping factor (300), Separation (68db)

I have never really paid to much attention to these small details before, i just went by ear and bought it, but i will be buying from a dealer over the phone so i can't listen.

Does anyone see anything i should be concerned about with those specs, or will i be incredibly happy with the sound just like the VR804??



-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.



Replies:

Posted By: customsuburb
Date Posted: April 04, 2005 at 9:01 PM
The VR602 specs look > than the VR804's. You probobly won't be able to hear a difference in sound quality, between the two amps though.

-------------



Posted By: Alpine Guy
Date Posted: April 04, 2005 at 9:48 PM
Excellent, thanks!

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.


Print Page | Close Window