2001 civic power cable routing
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53305
Printed Date: September 12, 2025 at 7:04 PM
Topic: 2001 civic power cable routing
Posted By: bebitte
Subject: 2001 civic power cable routing
Date Posted: April 05, 2005 at 12:37 PM
Hi I have a 2001 civic SI coupe or EX in USA and i was wondering where the best place to route my power cable through the firewall. I am using a 8 gauge wire. I wanted to make it go through the rubber seal on the passenger side floor where the cabling already goes through but i would have to make a hole in the seal and i don't want moisture coming in there. Anyone has a better place to make it go through or a good way to seal the hole? Thanks.
Replies:
Posted By: tcss
Date Posted: April 05, 2005 at 6:27 PM
Should be a factory grommet near the steering shaft under the hood that you can pierce and get 8ga thru.
Posted By: geepherder
Date Posted: April 05, 2005 at 9:40 PM
Just go through there and use some silicone sealant if you're worried about moisture.
-------------
My ex once told me I have a perfect face for radio.
Posted By: bebitte
Date Posted: April 07, 2005 at 9:17 AM
This worked well thanks guys.
|