Print Page | Close Window

Amp for current Brahma 10'' series?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53338
Printed Date: November 01, 2025 at 7:31 AM


Topic: Amp for current Brahma 10'' series?

Posted By: nickvr
Subject: Amp for current Brahma 10'' series?
Date Posted: April 05, 2005 at 6:56 PM

Just about done with scoping my ICE... For front stage I decided on 6" JBL GTis running of a RF 502S AMP and back fill with 3" JBL coaxials running of HU.

For bass I decided on 1x Brahma 10" MKii (or new replacement when available). I just haven't figured out what AMP to use to optimally drive the Brahmas...? I guess I would need close to 1000WRMS into 1ohm? I just might also be able to squeeze a 1.35 cu ft enclosure in the back (not confirmed yet..). If proven possible, I might even consider putting in 2 x Brahma 10" subs (.675" / sub). I saw names like Eclipse, MA Audio etc..What AMP would you recommend and do you think the RF502S is good to push the JBL GtiS to SQ comp levels?

Regards,



-------------
Nick



Replies:

Posted By: Alpine Guy
Date Posted: April 05, 2005 at 9:20 PM
I definately reccomend the Crossfire VR1000D, the 2003 Alpine Mrd-M1000 or 2004 Alpine Mrd-m1001.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.


Print Page | Close Window