Replacing Mach460 system in 1999 Cobra
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53411
Printed Date: May 09, 2024 at 9:13 AM
Topic: Replacing Mach460 system in 1999 Cobra
Posted By: mach460
Subject: Replacing Mach460 system in 1999 Cobra
Date Posted: April 06, 2005 at 5:02 PM
I'm about to replace my entire Mach460 system (1999 Cobra) with an Alpine system all around 
. The stock setup is no longer going to be used.
new system will have:
Alpine CDA-9851
Alpine v12 MRV-F345 500w
Alpine Type R 5x7's all around
Rockford Fosgate Cables
XM Radio
(sub and mono amp to be added later)
Installing speakers/amp and running the wire under my carpet is cake for me, and I want to install the Alpine CDA-9851 deck myself, but when it comes to the different wires and harnesses I'm confused
. I need some help with the wiring to the new stereo. Which harness is used? Which wire to/not to tap?
If anyone has any wiring diagrams or How-to's for my system, or any beneficial tips for the install I'd reallyreally appreciate it! thanks!
. The stock setup is no longer going to be used.
new system will have:
Alpine CDA-9851
Alpine v12 MRV-F345 500w
Alpine Type R 5x7's all around
Rockford Fosgate Cables
XM Radio
(sub and mono amp to be added later)
Installing speakers/amp and running the wire under my carpet is cake for me, and I want to install the Alpine CDA-9851 deck myself, but when it comes to the different wires and harnesses I'm confused
. I need some help with the wiring to the new stereo. Which harness is used? Which wire to/not to tap?
If anyone has any wiring diagrams or How-to's for my system, or any beneficial tips for the install I'd reallyreally appreciate it! thanks!
Replies:
Posted By: geepherder
Date Posted: April 06, 2005 at 8:51 PM