’92 Toyota 4runner factory amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53478
Printed Date: May 05, 2025 at 5:31 AM

Topic: ’92 Toyota 4runner factory amp

Posted By: Deathlock
Subject: ’92 Toyota 4runner factory amp
Date Posted: April 07, 2005 at 1:51 PM

I installed a new aftermarket radio. I disconnected the factory hardness from the factory amp. Everything is connected. But my back speakers don't work only the tweeters. Front ones are working. Double checked all the wiring and everything is fine. Even installed the factory radio back on and the back speakers work. But not with the new radio. Can anyone tell me what I am doing wrong? Thanks!

Replies:

Posted By: tcss
Date Posted: April 07, 2005 at 2:25 PM

Find the black and pink wires on the power factory plug. Hook BOTH of them to your remote turn on lead ( blue/white ). The rear 5 1/4s are amplified, this will turn the factory amp on.

Posted By: Deathlock
Date Posted: April 07, 2005 at 3:07 PM

Thanks TCSS!!!!

Print Page | Close Window