Print Page | Close Window

amp install 2004 Chevrolet Malibu maxx

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53578
Printed Date: July 05, 2025 at 11:12 AM


Topic: amp install 2004 Chevrolet Malibu maxx

Posted By: p71cruiser
Subject: amp install 2004 Chevrolet Malibu maxx
Date Posted: April 09, 2005 at 12:00 AM

I'm installing an amp and subs to the factory radio using a line output converter. Could anyone Give me the wire colors plus and minus to the rear speakers at the b pilar? ( where the seatbelt is for the front seats?) And Also where would you get threw the firewall at? If i really need to drill a hole would the passanger side be better? and how can I get threw the double firewall? This has to be the hardest car I have done an amp on no room to work on the firewall.

Thanks a lot for any info you can give 




Replies:

Posted By: p71cruiser
Date Posted: April 09, 2005 at 12:54 AM

Oh yea ! I need an ACC wire for amp turn-on hopefully without going the ign switch.that seems to be a pain to get to.

thx again


Print Page | Close Window