Print Page | Close Window

Remote Punch Bass

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5385
Printed Date: July 27, 2025 at 5:26 AM


Topic: Remote Punch Bass

Posted By: xxMxx
Subject: Remote Punch Bass
Date Posted: November 12, 2002 at 5:57 PM

I bought my RF 800.2 recently  but it doesn't come with the remote punch bass control, Does anyone know how to make one that can fit my  amp? The remote plug is a normal telephone plug, I got a 10K volume controler but I'm not sure which cable goes where.Thanks in advance




Replies:

Posted By: djfearny2
Date Posted: November 12, 2002 at 6:17 PM
you cant make one unless your good with resistors cause it take a trial and error with resistors to figure it out , cause if you give it two much power the amp will keep cutting off. and may damage the product.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.



Posted By: wvsquirrel
Date Posted: November 13, 2002 at 9:37 PM
You would be better off buying it from Rockford.  They offer a Coupler that includes the Remote Bass unit that you need.  RF part number RFC3215.  If you contact Rockford, they can get you just the Remote Bass unit as well.

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com



Posted By: xxMxx
Date Posted: November 13, 2002 at 11:19 PM

i'll try to find it from RF dealer here but i'm not sure they carry them, anyway thanks guys




Posted By: wvsquirrel
Date Posted: November 14, 2002 at 12:00 AM
Even if they don't carry them, most RF dealers will order anything you need straight from Rockford

-------------
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com


Print Page | Close Window