Print Page | Close Window

alpine cva1004

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54202
Printed Date: May 09, 2024 at 3:38 AM


Topic: alpine cva1004

Posted By: junior24
Subject: alpine cva1004
Date Posted: April 19, 2005 at 12:46 AM

how do you bypass the parking brake switch   some on please help ..thanks jr



Replies:

Posted By: mikejc
Date Posted: April 19, 2005 at 3:01 PM

If you haven't already firgured it out here is the procedure.

Get two toggle switches -First switch= Connect one side of the switch to12v constant and the other side of switch to theYellow-Black(Foot Brake) wire.

Second Swith= Connect one side of the switch to a ground, and the other side of the switch to the Yellow/Blue (Park Brake) wire.

Now enter the unlock sequence- Turn first switch on(Foot Brake), and turn second switch on(Park Brake). Now turn second switch off(Park Brake), and then back on. Now turn first switch off.  This should take the warning PICTURE OFF FOR YOUR SAFETY off of the screen.


Print Page | Close Window