Factory Amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54290
Printed Date: May 07, 2024 at 7:32 PM

Topic: Factory Amp

Posted By: Izzum88
Subject: Factory Amp
Date Posted: April 20, 2005 at 1:33 PM

I just had my car tested and my factory amp has a blown channel, so only my front speakers in my car work. Is there any solutions you guys can come up with besides replacing the factory amp?

Replies:

Posted By: LTHLQUICKSILVER
Date Posted: April 20, 2005 at 7:22 PM

I can't really think of a way short of repacing the factory amp or buying an aftermarket one. I would tell you to split off the working channels but factory systems are VERY ohm sensitive. If you change the resistance, all hell breaks loose. I think you're stuck my friend.

Posted By: ss-installer
Date Posted: April 21, 2005 at 8:27 AM

if you are running an aftermarket HU then you can rewire the speakers. just bypass the amp.

-------------

Print Page | Close Window