Pioneer KE-A630 wiring diagram/memory info needed

I neeed a wiring diagram or info on wiring and setting station memory for an old Pioneer KE-A630 car stereo It has 4 sets of wires coming out the back..from right to left

1st set of wires: white and red "RCA female jacks" 

 2nd set : red, yellow and orange power leads (they have in line fuses in them

3rd set: 2 doubl  wires one set are green with black stripe on one, the other set is gray with a black stripe on one of them

4th and last set: a blue wire and a black wire

1 st: RCA wires

2 nd set :

• RED : Switched ignition power
• YELLOW : Constant power
• ORANGE : Illumination lead

3 rd set: ( Standard colors below are for rear speaker. If there are no other speaker wires, use these for the front speakers )

• Green : Left Rear +
• GREEN/ Black : Left rear (-)
• Gray : Right Front +
• Gray/Black : Right Front (-)

4th set :

• Blue : Remote turn on lead or power antenna lead
• Black : Ground

OK thanks Jeff..

BTW...I figured that was the correct wiring from a post on a diff model pioneer in the forum

I connected the stereo directly to the battery using yellow and orange to positive and black directly to battery negative, and conected the speakers...I did not even get a squeek out of it.... no noise,..... no illumination..nothing...does the antanna HAVE to be connected as a ground as well (as a ground for the stereos chassis)?  when I hooked it up to the battery I did not connect the antenna