4 amp fuse
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54513
Printed Date: May 11, 2024 at 1:37 AM
Topic: 4 amp fuse
Posted By: HICKMANAE3
Subject: 4 amp fuse
Date Posted: April 23, 2005 at 11:41 PM
On the box it says the stero accepts a 4 amp fuse but would it be possible for me to use a 3 amp fuse and also if i do use a 3 amp fuse instead, what may happen with my stero
-------------
No security system can beat the tow truck :(
Replies:
Posted By: jeffchilcott
Date Posted: April 24, 2005 at 12:19 AM
you might blow fuses, it wont hurt your stereo, what type of stereo is this? that seams really really small
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: haemphyst
Date Posted: April 24, 2005 at 12:21 AM
If you put a 3 amp fuse in place of a 4 amp fuse, nothing will happen to the stereo, but the fuse COULD blow before it really needs to as a protection measure. It is perfectly safe to do what you are suggesting, but "nuisance blowing" becomes a real possibility. Can you not find a 4 amp fuse anywhere, or what? Why are you asking about this?
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
|