wires need too bridge amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54815
Printed Date: May 14, 2024 at 1:51 AM

Topic: wires need too bridge amp

Posted By: colaroaster
Subject: wires need too bridge amp
Date Posted: April 29, 2005 at 7:02 AM

i got a precision power a300, wondering if anyone knows which wires i would use to bridge this amp? any help would be apperciated.

Replies:

Posted By: Masta N
Date Posted: April 29, 2005 at 9:04 AM

Left +, Right -. It is ussually the outside wires in the molex.

Posted By: DYohn
Date Posted: April 29, 2005 at 9:55 AM

The Art series amps were very nice. If you do bridge it, be sure your net load is at least 4-ohms.

-------------
Support the12volt.com

Print Page | Close Window