how to crimp 2awg
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55216
Printed Date: May 02, 2024 at 1:22 PM
Topic: how to crimp 2awg
Posted By: IMPORTDUDE
Subject: how to crimp 2awg
Date Posted: May 06, 2005 at 1:20 AM
iam making a ground wire... i cant seem to find any tools to crimp 2awg... !here is the plug i got TIA!
Replies:
Posted By: IMPORTDUDE
Date Posted: May 06, 2005 at 1:23 AM
Posted By: IMPORTDUDE
Date Posted: May 06, 2005 at 1:27 AM
Posted By: xTimx
Date Posted: May 06, 2005 at 1:40 AM
the links are bonk! fix them!
------------- xTimx
Posted By: stevdart
Date Posted: May 06, 2005 at 7:10 AM
https://www.the12volt.com/installbay/search.asp?KW=crimp&SM=1&SI=TC&FM=0&OB=1&Submit=Start+Search------------- Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: elvedinUSA
Date Posted: May 06, 2005 at 2:19 PM
there is a tool for it but it is kinda expensive but does the job really good....but if nothing....hit it couple times with the hamer and solider the conection really good
Posted By: audiobass10
Date Posted: May 06, 2005 at 2:37 PM
Hammer works fine. 2awg should be very easy to crimp. Try crimpin 2/0! Not an easy task
------------- Dave
Pioneer Premier DEH-P660
15" Kicker CVR
Profile AP1000M
It's Loud
Posted By: xTimx
Date Posted: May 06, 2005 at 3:06 PM
hammer and lots of solder! thats how i got mine on there!
------------- xTimx
Posted By: IMPORTDUDE
Date Posted: May 06, 2005 at 3:18 PM
audiobass10 wrote:
Hammer works fine. 2awg should be very easy to crimp. Try crimpin 2/0! Not an easy task
hah imma try Vise up the middle then solder since it has a slot in it
Posted By: xTimx
Date Posted: May 06, 2005 at 5:46 PM
well, vise it..solder it, then take it out and use a hammer on it.....or a sledge hammer for that matter!
------------- xTimx
Posted By: Drewt
Date Posted: May 06, 2005 at 6:09 PM
yeah, just hammer the shhh out of it....
-Drew
Posted By: djkeebz
Date Posted: May 12, 2005 at 12:03 AM
vise it on side at a time and make the split overlap and then squeeze the sh*t outta it with vise
|