Print Page | Close Window

subwoofer wiring question...

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55310
Printed Date: May 21, 2024 at 1:32 PM


Topic: subwoofer wiring question...

Posted By: ksw870
Subject: subwoofer wiring question...
Date Posted: May 07, 2005 at 7:15 PM

https://cardiscountstereos.com/catalog%20page.asp?Product+%23=AW1008T
thats pretty much the speaker i got, but it had 8 different places on the speaker to put in the speaker wire

and i used the parallel diagram here
https://audiobahn.com/tech/wiring/DualLug/1_sub_wiring.pdf

but i want it wired to 1 ohm and im not sure that it is...its a 1000 watt rms speaker and it doesnt sound all that loud



Replies:

Posted By: Captanham
Date Posted: May 07, 2005 at 10:10 PM

audio bahn always has 8 conections, it's really only 4, but they double each output.. so they have like two +'s and two -'s for each VC, it's just to make it easier to wire, without craming 2 wires in a terminal,,, just connect one side's + and - to the amp, then take the other outputs on that side, and connect them to a pair from the other side, it will be 1 ohm, and it will still suck because it's a flame q, and they suck, 

ps, i just looked at that wiring pdf,, if you did it like that then it is 1 ohm,,



-------------
Bad Boys Customs
    audio - video - security

If you use it. Suport it. Donate to the 12 volt!


Print Page | Close Window