speaker rings

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55410
Printed Date: May 13, 2025 at 12:44 AM

Topic: speaker rings

Posted By: shkeel
Subject: speaker rings
Date Posted: May 09, 2005 at 10:13 AM

My car takes a 6.5in speaker in the back, but i was wondering if there is anywhere i can buy a speaker ring to convert it to fit a 6x9?

Replies:

Posted By: TruckSystem
Date Posted: May 09, 2005 at 11:09 AM

You would most likely need to do some form of modification to fit a 6x9 in a 6.5" hole, what kind of vehicle is it.

-------------
2003 Chevrolet Silverado Standard Cab ~ Alpine CDA-9851
Diamond Audio D3600.1 ~ 2x Diamond Audio TM310D4
Diamond Audio D3400.4 ~ Diamond Audio Hex S600s
AstroStart RS5204 Remote Start/Alarm

Posted By: shkeel
Date Posted: May 09, 2005 at 12:53 PM

its a 94 chevy camaro

the way the speaker fits the magnet would fit in the hole but if there was some kind of speaker conversion spacer it would fit no prob. I just dont feel like doin the whole fiberglass thing if its not nesessary.

Posted By: AudioZBahn
Date Posted: May 09, 2005 at 2:16 PM

Go to partsexpress.com they should have what you need. You could probably make something out of would to fit if you can't find anything.

Print Page | Close Window