Wiring 2 DVC 4 Ohm Subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55494
Printed Date: May 13, 2025 at 7:35 PM

Topic: Wiring 2 DVC 4 Ohm Subs

Posted By: blade13432
Subject: Wiring 2 DVC 4 Ohm Subs
Date Posted: May 10, 2005 at 7:27 PM

How would I go about wiring up two 4 ohm DVC Alpine Type R's subs to a Alpine Mono Block amp?

Replies:

Posted By: racer427
Date Posted: May 10, 2005 at 7:33 PM

Here ya go. Hope this helps.

Chris

	Wiring Option #1
	Wiring Option #2

Speaker Polarity
Positive (+)	Negative (-)
red post	black post
purple dot - 4 ohm	no dot
red dot - 8 ohm	no dot

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Print Page | Close Window