Print Page | Close Window

2004 grand marquis to 97 ranger

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55617
Printed Date: May 15, 2025 at 11:53 AM


Topic: 2004 grand marquis to 97 ranger

Posted By: cannibal769
Subject: 2004 grand marquis to 97 ranger
Date Posted: May 12, 2005 at 4:33 PM

I recently install a radio with cd and tape from a 2004 grand marquis into my 97 ranger. I wired a new harness correctly. when I turn up the volume a little past half way the sound begins to distort. When I turn the volume below that mark it sounds perfect. When the bass hits hard at half level the sound does the same thing. I have the wiring digram for the marquis.. There is only two connection I didn't do according to the diagram. One is to the VSS and power during start. Do any of these matter or is there something else I need to do get the new radio work with my older truck system.



Replies:

Posted By: cannibal769
Date Posted: May 12, 2005 at 4:44 PM
meant to say 2003 grand marquis...sorry about the typo




Posted By: geepherder
Date Posted: May 12, 2005 at 10:11 PM
Well, in my experience, that's usually where Ford radios distort- around half volume.  However- I wouldn't say it sounds perfect below that.

-------------
My ex once told me I have a perfect face for radio.




Posted By: cannibal769
Date Posted: May 13, 2005 at 7:22 AM
the sound goes in and out like it needs more power





Print Page | Close Window