Question about Metra kit
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55642
Printed Date: May 19, 2024 at 12:21 PM
Topic: Question about Metra kit
Posted By: eba eba
Subject: Question about Metra kit
Date Posted: May 13, 2005 at 2:24 AM
I have a kit for my Hummer H2 and it is the kit that relocates the factory radio. Question i have is this, i am changing the front and rear door speakers but not going to bother changing the far rear speaker on the back wall beside the hatch since the subs will drown them out anyways and i am also putting in an amp and new head unit. The harness has a clip for an optional speaker to hear the chime and what i wanted to do is just hook up those wires going to the rear speaker wire then into the factory harness that is hooked up to the BOSE.
Replies:
Posted By: ccroadshop99031
Date Posted: May 13, 2005 at 1:53 PM
i wouldnt just so you wouldnt be running high level speaker output backwards through the harness id jus use the metra part GMRC01 (databus doorchime interface)
Posted By: geepherder
Date Posted: May 13, 2005 at 8:00 PM
Don't do that- just buy a junk speaker from AutoZone or Wal-Mart and hook it up.
-------------
My ex once told me I have a perfect face for radio.
Posted By: lagatbezan
Date Posted: May 14, 2005 at 3:17 PM
|