2005 durango, replacing radio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55692
Printed Date: May 17, 2025 at 12:53 PM

Topic: 2005 durango, replacing radio

Posted By: bumpingjeep
Subject: 2005 durango, replacing radio
Date Posted: May 13, 2005 at 9:14 PM

friend just got one...and i was trying to find out about replacing the radio...haven't actually seen it yet other than their website...so any tips or experiences on replacing the deck would be appreciated...thanks

Replies:

Posted By: lagatbezan
Date Posted: May 14, 2005 at 3:13 PM

they make a dash kit and a harness for this car- best kits makes it. I did one last month with a factory amp in it. it is located in the back side panel on the driver side.

Posted By: homer1
Date Posted: May 16, 2005 at 10:44 AM

lagatbezan - Did you bypass the factory amp? Just curious, I thought those were part of the new stuff Dodge is doing w/digital amp triggers. Thanks!

-------------
Experience gained is directly proportional to the amount of equipment destroyed - break it & learn!

Posted By: lagatbezan
Date Posted: May 16, 2005 at 12:15 PM

homer1- yes, i bypassed the amp and ran speaker wires from the radio to the wires that were going to the amp. all worked fine. I installed a pioneer AVIC-N2. I heard that too about the new Dodges being digital, but it worked out fine.

Print Page | Close Window