Print Page | Close Window

need volfenhag zx-4710 manual

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55737
Printed Date: May 16, 2024 at 7:17 PM


Topic: need volfenhag zx-4710 manual

Posted By: davidh_r
Subject: need volfenhag zx-4710 manual
Date Posted: May 14, 2005 at 3:13 PM

My friend has a pair of Volfenhag zx-4710's 4ohm dvc model. we dont know anything about these. Anyone have an electronic manual?



Replies:

Posted By: davidh_r
Date Posted: May 17, 2005 at 7:57 PM
If someone could scan and email the manual to me that would be great, otherwise, if someone could just post the specs for it, that be awseome (box configurations mainly and/or woofer t/s)




Posted By: wayland1985
Date Posted: May 20, 2005 at 7:50 PM
If you're going to steal woofers, you may as well steal some decent ones...

-------------
~WAYLAND




Posted By: haemphyst
Date Posted: May 20, 2005 at 7:52 PM
Step one: Walk toward nearest dumpster.
Step two: Insert Volfenhag woofers.
Step three: Walk away, and leave for some other sucker.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."




Posted By: ss-installer
Date Posted: May 20, 2005 at 9:54 PM
i had a guy bring some of those to the shop and the manual said to "hook the red up to + and black to - on amp, if the speaker is distorted then reverse polarity." does the manufacturer not know the + or - side of their own subs? we hooked them up for the guy anyway and it sounded like @ss.

-------------




Posted By: OhioMike1101
Date Posted: May 21, 2005 at 12:50 AM
those subs are power hungry and don't get very loud.

but damn, they do look good with that red aluminum cone and dysfunctionally large basket/magnet.

what do you need a manual for? you planning a ported box for them or something...actually, subs that low quality usually don't even list any T/S parameters in the manual.





Print Page | Close Window