WinISD Question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55785
Printed Date: May 08, 2025 at 11:50 PM

Topic: WinISD Question

Posted By: racer427
Subject: WinISD Question
Date Posted: May 15, 2005 at 2:04 PM

Hey guy's.

I am currently trying to model up a vented enclosure for my subs. My subs are not on the list provided by WinISD so, I am trying to manually input the parameters for the subs but, I keep getting an error no matter what I do. I read the help file and followed their entry proceedure but, I still keep getting the same error. CAn anyone Help?

Here is the error: Consistancy check on following parameter groups failed.

Qts, Qms, Qes

Chris

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Replies:

Posted By: Alpine Guy
Date Posted: May 15, 2005 at 2:21 PM

I find when entering new drivers you have to sometimes enter the bare minimum, there always seems to be a problem with specs that manufactures give you that winisd does not like.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Posted By: racer427
Date Posted: May 15, 2005 at 2:32 PM

Tryed that, Just entered the Small parameters and I keep getting the same thing no matter what I enter.

UHG

Chris

Posted By: stevdart
Date Posted: May 15, 2005 at 2:35 PM

Change Qts to zeros and just use Qem and Qes to figure Qts. Make sure the 'auto calculate' box is checkeed That should fix it.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: Alpine Guy
Date Posted: May 15, 2005 at 2:36 PM

try just entering qms, qts, fs, vas, xmax, spl, re, sd

Edit: ^^^ or that, he taught me....

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Posted By: customsuburb
Date Posted: May 15, 2005 at 3:23 PM

I never usually never enter the qes or the vas...I enter everything else that Alpine Guy does.

Posted By: racer427
Date Posted: May 15, 2005 at 9:21 PM

Thanks guy's, I think that I got that part worked out, just have to figure out the rest of it now! HA HA

Chris