amp and sub set up

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55843
Printed Date: July 06, 2025 at 10:41 AM

Topic: amp and sub set up

Posted By: gicts
Subject: amp and sub set up
Date Posted: May 16, 2005 at 5:47 PM

I rencently got 2 2 ohm Alpines that are 300 RMS each and a 2 channel amp that 300X2 RMS @ 2 ohms. What ohm load would you recommend I set the subs for?

Replies:

Posted By: Ravendarat
Date Posted: May 16, 2005 at 5:52 PM

Well if the subs are 2 ohm and the amp is 300x2 at two ohms i would just wire one sub to each channel and let it rip. It matches up perfect so I think this is a easy choice.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: gicts
Date Posted: May 16, 2005 at 7:32 PM

just making 100% sure, I should set the ohm load as 2, right? I have heard it should be at 4 as well as 8

Print Page | Close Window