Print Page | Close Window

8 pin changer connector

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55966
Printed Date: September 15, 2025 at 6:35 AM


Topic: 8 pin changer connector

Posted By: mbp9997
Subject: 8 pin changer connector
Date Posted: May 18, 2005 at 11:22 AM

Im definately a noob to 12volt but not to stereos.  I need some help...I cant seem to find a diagram for a 8 pin changer connector.  Ive got one that accidentally got pulled loose in the trunk.  Instead of buying an entire new kit (99 Mercury sable factory premium sound and I dont know if it had a factory cd first) I was just going to solder the wires to the connector again but the only wire that is still connected is W at #8. Any ideas?  The changer is an audiovox el crappo (SP-10CD) and it has the CDC-FDR audiovox amp to changer controls.  Thanks for any help.

-Matthew




Replies:

Posted By: mbp9997
Date Posted: May 19, 2005 at 10:53 AM
Someone has to know...and I still cant find out...Please help??


Print Page | Close Window