wattage output

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56211
Printed Date: May 20, 2024 at 12:42 AM

Topic: wattage output

Posted By: silverado94
Subject: wattage output
Date Posted: May 22, 2005 at 9:48 AM

I think i've talked about this before but not sure . i'm using a 200 watt head unit and have installed a california msx600 mono amp . running a pair of 12" street egde 200 watt each sub's . these are in a 1ft x 15" x 26" sealed encloser . it put's out the bass i like but what would the output wattage be . i've contact the amp mfg and they stated it pushes 410 watt's is this true ? . also who mfg's the street edge sub's can't locate a website for them .

Replies:

Posted By: stevdart
Date Posted: May 22, 2005 at 10:22 AM

The only way to know is to bench-test the amp. Otherwise, you are only going on assumptions. https://www.bcae1.com/measpwr.htm shows you the steps. The hard part is having all the necessary equipment to do it. If you can't bench test it, just enjoy it.

First hit on a google search:

https://www.memphiscaraudio.com/LiveImages/114/38/DocumentURL.pdf

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window