new to ported boxes

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56911
Printed Date: April 20, 2024 at 2:48 AM

Topic: new to ported boxes

Posted By: Audiobahn1500
Subject: new to ported boxes
Date Posted: June 02, 2005 at 4:07 PM

hey guys ive built many sealed boxes but i have never built a ported box and i was curious where i would even start when i do this. I want it to go in to the trunk of a 99 grand am i dont know if that helps any. Well let me know what you guys have to say thanks

Chad

Replies:

Posted By: Sancho
Date Posted: June 02, 2005 at 5:05 PM

try to use winisd program to design a proper enclosure it is really not difficult program, very helpful

-------------
Head Unit:Alpine CDA 9835
6.5 MB Quart Pce 210
Amp:JBL 80.4
Amp:JBL 1200.1
Sub:Adire Brahma 12 MKII

Posted By: sedate
Date Posted: June 02, 2005 at 11:24 PM

Yea man learn how to model your subwoofer up in WinISD.

https://www.linearteam.dk/

D/L it and follow the 'help' file included. All you have to do is get your Thielle-Small parameters for the sub you want to use and plug them in.. it'll take ya all of 20 minutes to download it and learn how to do it. You'll save urself reams of MDF and learn more about response curves than you ever thought you would.

D/L the proggie and post back if you have more questions and we'll walk you through it.

-------------
"I'm finished!" - Daniel Plainview