Okay I have one Kicker L7(dual 4 ohm) on the way...(for now) I am gonna order 2 or 3 more...
Now how big of a box should I make for 3 and for 4??? I like sealed boxes..since I have made lots of them and was very impressed by sealed over ported.
But now I am going more for SPL so I was to make these as loud as possible!!So I think im gonna have to go ported
The amp is a US Amps VLX-400...2400watts RMS@1ohm (can do alot more)
All this is gonna go into a 1995 LHS!
Any info and responses are appreciated.
Jay
go large and and go vented one thing i can tell u about those subs be carefull i have had 2 defective ones before 1 10" L7 and a 15" go about 2.5 cubes per sud and make vented style ports the long thin ones on kickers boxes for the L7 and L5s ? are you going to put the box in just the trunk or are you gonna put your back seats down and put some dynamat in sound deteting will help alot to
-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
i take back my statment about 2.5 cubes per sub that might be right but i dont want you to spend 3 days makeing a box then not have it sound good go to
www.kicker.com you can get the right specs for spl for those subs and the port specs also hope that helps
-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
Ya i am gonna put them in the trunk run 3 of them at .67 ohms on my VLX-400 turned down alot too lol.....With square subs should I seperate Chamber them all???????
Jay