amp question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57164
Printed Date: May 15, 2025 at 10:15 PM

Topic: amp question

Posted By: Redstorm3
Subject: amp question
Date Posted: June 06, 2005 at 12:45 PM

I have a Kenwood KAC-7201 amplifier that at 4ohms it can handle 150w x 2 OR 460w x 1 bridged. My question is if you have 2 12" subs whether they are SVC or DVC, as long as they are wired to bring a 4ohm load, for example,

posted_image

will the amp run at the 150x2 or @ the 460w bridged?

Replies:

Posted By: Francious70
Date Posted: June 06, 2005 at 1:11 PM

If you use option #1 the amp will put out it's rated 450 watts bridged. If you have 2 four ohm SVC woofers, the you would not be able to have a 4 ohm total load.

Paul

Posted By: Redstorm3
Date Posted: June 06, 2005 at 1:27 PM

thanks, all i need to find are some 12" dvc subs that can handle that, any recommendations?

Posted By: Francious70
Date Posted: June 06, 2005 at 2:57 PM

Check your other thread.

Paul

Print Page | Close Window